vibratory road roller, hydraulic vibratory road roller--produced by Skyway

Road Roller CR270
Dimension of Road Roller CR270


Workability
	Good for Small job, Pedestrian path, Parking Lot, Cycle Load, Walking Path, Ditch Compaction and Drive Way etc. Non-Rear Overhang provides better back ward job by better visibility.
Zero Overhang
	SMALLEST END OVERHANGS IN ITS CLASS.
	The machine has a zero overhang front and rear end design that delivers close-approach compaction at both ends. This reduces the amount of hand finishing in dead-end paving situations, and gives better maneuverability and reduced finishing passes in all situations.
Water Tank
	Water Tank is housed entirely inside of machine perimeter. Allows for no rear overhang, thus facilitating compaction closer to structure. Does not counterbalanced machine and does not effectively lighten front end of machine, which allows stronger front drum compaction.

Throttle Lever
	·Infinitely variable engine speed control. ·Allows fine tuning of speed during travel.
Vibration Control
	·Ergonomic controls ·Vibrator on-off button with forward-reverse handle.

Scraper
	·Spring Loaded and adjustables scraper Bars. ·Can be easily cleaned, especially when freezing and drying exists.
Side Overhang
	·Minimal side overhang allows operator to compact asphalt close to structure, improving productivity and finish quality. Zero "0" overhand up to 340mm on both sides of machine.

*Specifications are subject to change without notice.
*Protection bar is available as option.
Model		CR270
Weight
Gross weight	kg (lbs)	1,320(2,910)
Empty weight	kg (lbs)	1,130(2,491)
Dimension
Overall length	mm (in.)	1,910(75")
Overall width	mm (in.)	1,015(40")
Overall height	mm (in.)	2,270(89")
Wheelbase	mm (in.)	1,300(51")
Drum size
Front	Roll (width×dia.) mm(in.)	900×560 (35"×22") Drive,Vibration
Rear	Roll (width×dia.) mm(in.)	900×560 (35"×22") Drive
Thicness	mm (in.)	12(0.5")
Performance Travel speed (forward / reverse)
	km/h (m/ph)	0 - 7.5 (0 - 4.7)
Vibrating power
Frequency	Hz {vpm}	66.7{4,000}
Centrifugal force	kN{kgf}(lbs)	13.2{1,350}(2,976)
Gradability	%(deg)	34(18.8)
Rolling width	mm	900(35")
Steering System		Hydraulic Type (Articulated Type)
Minimum turning radius(outer)	m	2.8(110")
Engine
Model		HONDA "GX610" Engine
Total displacement	L{cc}(cu.in)	0.614{614}(37.5)
Rated output	kW{PS}/min(HP/rpm)	13.2{18}/3,600(17.8/3,600)
Max. torque		43.1N/m{4.39kgf/m}/2,500min (31.8ft-lbs/2,500rpm)
Tank capacity
Fuel tank	L (gal)	30(7.9)
Hydraulic tank	L (gal)	30(7.9)
Sprinkler tank	L (gal)	190(50.2)